Hitachi GR2000 Series Configuration Commands page 136

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Range of value:
Specifies the maximum contract band restriction by kbit/s. Specifies burst size
in byte unit. If a value greater than the line speed is set, no action at breach is
taken.
When setting this parameter, it is not possible to set -upc, or -upc_burst.
Packets exceeding the maximum band when setting this parameter are all
discarded.
When this is used, the number of entries used per list may become two or four
entries.(Note 1)
Default:
Range of value:
Specifies the minimum band assurance by kbit/s. Specifies burst size in byte
unit.
If a value greater than the line speed is set, no action at breach is taken.
When setting this parameter, it is not possible to set -upc, or -upc_burst.
When this parameter is used, the number of entries used per list may become
two or four entries. (Note 1)
Default:
Range of value:
Specifies the connection branching index number (index specified in the DLCI
group information or the Vc-Group information). It selects and transmits DLCI/
VC specified in the group when relaying the packet that agrees with the flow
detecting conditions. For the list information setting the connection branching
index number, specify out (Outbound) as the flow control of the output side.
Default:
Range of value:
1-94
<kbps> : 0 to 2400000 (0 to 2.4G) (10-decimals).
If 0 to 4 is specified in the case of RP-C and RP-D, the
operation is performed by taking the contract band as
4.1[kbit/s].
<Byte> : 0 to 131072 (10-decimals)
None. (No contract band surveillance is executed.)
<kbps> : 0 to 2400000 (0 to 2.4G) (10-decimals).
If 0 to11 is specified in the case of RP-A, the operation is
performed by taking the contract band as 12[kbit/s].
If 0 to 4 is specified in the case of RP-C and RP-D, the
operation is performed by taking the contract band as
4.1[kbit/s].
<Byte> : 0 to 131072 (10-decimals)
None. (No contract band surveillance is executed.)
<kbps>: 0 to 2400000 (0 to 2.4G) (10-decimals).
If 0 to 4 is specified, the operation is performed by taking the
contract band as 4.1[kbit/s].
<Byte>: 0 to 131072 (10-decimals)
None.
0 to 7.
GR2K-GA-0014
Ver. 07-02