Table 1-68 Maximum Range Of Send Bandwidth - Hitachi GR2000 Series Configuration Commands

Hitachi gigabit router configuration guide

Hide thumbs Also See for GR2000 Series:

Table of Contents

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2

Range of value:

Table 1-68 Maximum Range of Send Bandwidth

RP-D6, RP-DV

NE1G-1LHBA 1000BASE-LH

The maximum transmission band of the line can be set in 1 kbit/s units.

The router operates based on the output priority control when the value out of the range that can be set in the

maximum transmission band of a line is set. If the maximum queue number has not been specified or if an ineffective

value has been set, the number is automatically set at 8 (4 in the case of Ethernet containing GR2000-1B and

the maximum queue number can be set at 64 only when set to one line (Line number zero). The queue mode that

can be used for each media type is as shown in the table below.

<maximum transmission band of a line>.

The setting range of a value differs for each line type.

Table 1-68 shows the range in which the maximum

transmission band of a line can be set.

320 - 590000

: equal minimum bandwidth guarantee

: minimum bandwidth guarantee (kbps)

: bandwidth control (traffic)

Range (*1) (*2)

1536 -100000 --

640 - 590000

64 Number of

5120 - 10000

5120 - 590000

GR2K-GA-0014