Hitachi GR2000 Series Configuration Commands page 206

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
e. To delete the queue number "two" in the interface names: "office1" and "group
1" that have set the group band control.
Related Commands
qos
qos-queue-list
qos-discard-mode
qos-ip-list
qos-ip-list-group
qos-tos-map
qos-ip
qos-ipx
qos-bridge
qos-hdlc, line, timeslot, ppp, frame-relay, dlci
Precautions
1. This command cannot be used with ATM.
2. When the operating configurations stored in memory are modified, the modified
interfaces will restart. Use caution when logged in through a network.
3. If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.
4. This command cannot be set when a -cops parameter is set to qos (QoS
information).
1-164 GR2K-GA-0014
Ver. 07-02