Extended-Filtering - Hitachi GR2000 Series Configuration Commands

Related Commands
bridge
bridge-interface
line
Precaution
1. The value specified for ageing is ageing out within the range of the value that
rounded out by 10 seconds unit. For example, when 30 to 39 is specified, ageing
out in 40 seconds.
2. If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.
2.2.4

extended-filtering

You can set extended-filtering information to delete and relay the frame, based on bit
pattern of the specific field designated by the MAC or data link header. Also you can
use the BIT pattern of the arbitrary frame field.
You can set a maximum of three filtering entries. The parameter fields are the same
in all three entries.
Input Format
Defining
Modifying
Inserting
Deleting
GR2K-GA-0014
Ver. 07-02
IPX/Bridge Information
2-35