Frame Relay Information - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
4.7.10

Frame Relay Information

Input Format
d e f a u l t
Parameters
The initial value items that can be set using frame relay Information and the initial
values during initial installation are shown in Table 4-12, "List of Initial Values That
Can Be Set Using ISDN Information and Initial Values During Initial Installation," on
page 4-49. For details of each parameter, refer to the configuration definition
information in "frame relay information".
4-44 GR2K-GA-0014
Ver. 07-02