Table 1-102 Allowable Characters - Hitachi GR2000 Series Configuration Commands

Hitachi gigabit router configuration guide

Hide thumbs Also See for GR2000 Series:

Table of Contents

Description:

Range of value:

Description:

Range of value:

Table 1-102 Allowable Characters

GR2K-GA-0014

This parameter specifies the use and disuse of a cops

-no: Not used.

This parameter is an identification name in the primary server

or backup server of this router. It is recommended to specify

the IP-Address or host name of this router used.

This parameter cannot be omitted.

A character string exceeding one character and not exceeding

14 characters is set using double quotation marks (").

Alphanumeric characters and special characters can be

entered. However, a character string can be entered without

using double quotation marks (") when no special character

(e.g., space) is contained in an entry character string.

However, notice that the characters below cannot be used.

"(double quotation mark), { (beginning of brace), } (end of

brace), ' (single quotation mark), ; (semicolon), $ (dollar), and '

(reverse single quotation mark). For more information, see

Table 2-1, in GR2000 Configuration Commands, Vol. 1.

Filtering/QoS Information