Hitachi GR2000 Series Configuration Commands page 292

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Default:
Range of value:
Description:
Default:
Range of value:
Description:
Default:
Range of value:
Description:
Default:
range of value:
Description:
Default:
Range of value:
Examples
1. Setting parameters
To suppress (
2. Changing parameters
To change the operation of IPX filtering entry number 2 to
protocol_type
2-26
Cannot be omitted
0-0xffff
This parameter specifies the range of subnets to be filtered by
applying subnet masks.
0x00000000
0-0xffffffff
This parameter specifies the network address for the
destination of the IPX packet to be filtered.
Cannot be omitted
0-0xffffffff
This parameter specifies the socket number for the destination
of the IPX packet to be filtered using a 4-digit hexadecimal
number.
Cannot be omitted
0-0xffff
This parameter specifies the reference mask value for
specifying comparative ranges of the network addresses in the
destination of the IPX packet when filtering.
0x00000000
0-0xffffffff
) filtering of the IPX frame in interface line1:
drop
to :
07
and the
forward
GR2K-GA-0014
Ver. 07-02