Chapter 4 - Operation Management Information; Host Name Information; Hosts - Hitachi GR2000 Series Configuration Commands

Operation Management Information
4.1

Host Name Information

*
Note: This object must be used in conjunction with the configuration subcommand.
4.1.1

hosts

The host name can be specified for identifying each device on the network, e.g., when
configuring log information or NTP information.
Function
Specifies host name information. Up to 20 host names can be registered.
Input format
To create a host name entry:
To delete a host name entry:
To show a host name entry:
Parameter
Description:
Description:
GR2K-GA-0014
Ver. 07-02
Specifies the target IPv4 address in dot notation and IPv6
address in colon nation.
Specifies the host name to be added to the target IPv4 or IPv6
address.
Chapter 4
4-1