Table 1-49 Relationship Between Upper And Lower Ip User Data Length Limits And Ip User Data Length - Hitachi GR2000 Series Configuration Commands

This parameter specifies precedence value, which is the upper 3 bits of the ToS
field. This is compared to the upper 3 bits of the ToS field of sent/received
packets. The lower 5 bits of the ToS field are ignored.
2
DSCP (Differentiated Services Code Point), CU (Current Unused)
Default:
Range of value:
Specifies the upper or lower limit of the IP user data length.
-upper: Upper limit of the IP user data length is designated.
-lower: Lower limit of the IP user data length is designated.
Default:
Range of value:
Table 1-49 Relationship Between Upper and Lower IP User Data Length Limits and IP
Upper and Lower
Limits Designation
-upper
-upper
-lower
-lower
Specifies the transmitter port number.
If port to be specified is one: nnnnn
If port number is specified by range:nnnnn-nnnnn
Default:
Range of value:
GR2K-GA-0014
Ver. 07-02
7 6 5 4
2 2 2
DSCP
High-order 6 bits are designated.
None (precedence values are not included in the detecting
condition)
0 - 7 (decimal)
None (TOS values are not included in the flow detecting
condition.)
0 to 65535 (decimal).
User Data Length
Relationship between A (packet value) : (Total Length)
- (Header Length)) and B (IP user data length
designated in constituting definition information)
None (the transmitter port number is not included in the flow
detecting condition.)
0 to 65535 (decimal). (Please refer to Table 1-50.)
3 2 1 0
2 2 2 2
CU
A < B
A > B
A > B
A < B
Filtering/QoS Information
Result
Agreed.
Disagreed.
Agreed.
Disagreed.
1-91