Table 1-40 General Icmp Type Code Number - Hitachi GR2000 Series Configuration Commands

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Description:
Default:
Range of value:
Specifies the transmitter port number.
If port to be specified is one: nnnnn
If port number is specified by range:nnnnn-nnnnn
Default:
Range of value:
Specifies the destination port number.
If port to be specified is one: nnnnn
If port number is specified by range:nnnnn-nnnnn
Default:
Range of value:

Table 1-40 General ICMP Type Code Number

Port Dumber
(Decimal)
20/tcp
21/tcp
22/tcp
23/tcp
25/tcp
53/tcp 53/udp
80/tcp
110/tcp 10/udp
161/udp
Description:
Default:
1-68
Specifies the value of the EXP field. Setting is possible only in
the ordinary packet flow detecting condition. The list
information set by this parameter should be specified as the
flow control of the input side that specified in (Inbound). If
specified out (Outbound), the specification is invalid. In
addition, the conditions of the said parameter are invalid even
if other flow detecting condition parameters are set. The
number of packets that coincide with the flow detection
conditions is not displayed. (This parameter is valid for RP-CV
and RP-DV.)
None.
0 to 7.
None (the transmitter port number is not included in the flow
detecting condition.)
0 to 65535 (decimal). (Please refer to Table 1-25.)
None (the transmitter port number is not included in the flow
detecting condition.)
0 to 65535 (decimal). (Please refer to Table 1-25.)
Name
File Transfer [Default Data]
File Transfer [Control]
Secure Shell Login
Telnet
Simple Mail Transfer
Domain Name Server
World Wide Web HTTP
Post Office Protocol - Version 3
SNMP
Specifies the IGMP type.
None. (The IGMP type is not included in the flow detecting
condition.)
GR2K-GA-0014
Ver. 07-02