Hitachi GR2000 Series Configuration Commands page 302

Hitachi Gigabit Router GR2000 Series Enhanced Version Configuration Commands, Vol. 2
Displaying
Parameters
Description:
Default:
Description:
Default:
Description:
Default:
Description:
:
off
:
da
:
sa
:
dsap
:
ssap
:
ctl
:
oui
:
pid
:
type
:
user
Default:
2-36
This parameter sets whether you perform extended-filtering:
- indicates extended filtering, and
yes
filtering.
-
no
This parameter specifies the name of the interface that
performs extended-filtering. When you specify
interfaces perform extended filtering. The DLCI name can be
specified for Frame Relay, and the VC name and group name
can be specified for ATM. The Peer Name can be specified for
ISDN.
Cannot be omitted
This parameter configures filtering operation:
frames that match the filtering conditions, and
frames that match the filtering conditions only to recipients
specified by interface name.
-
drop
Specifies filtering conditions (choose from the list below). You
can configure up to three items; however, only one item can be
set at a time. For example, when configuring three items, first
configure as filter1, then as filter2 and filter3.
No information
Recipient MAC address (6 octet)
Sender MAC address (6 octet)
Recipient SAP (1 octet)
Sender SAP (1 octet)
Control field (1 octet)
Organization code (3 octet)
Protocol ID (2 octet)
Type field when the format is Ethernet.
Specifying any user defined fields.
off
indicates -no extended
no
, all
all
discards
drop
relays
forward
GR2K-GA-0014
Ver. 07-02