Examples
1. Setting parameters:
To set discard mode 2 on NIF number 9:
2. Modifying parameters:
To change discard mode on NIF number 9 from 2 to 1:
3. Displaying settings:
To display settings:
4. Deleting settings:
To delete the NIF discard mode setting:
Related Commands
qos
qos-queue-list
qos-interface
qos-ip-list
qos-ip-list-group
qos-tos-map
qos-ip
Precautions
1. This command cannot be used with ATM.
2. If this command is inputted in the cases where changes are made on the IP
routing protocol information, the IP multicast protocol information, and the
MPLS information, and the apply command is not being executed, the apply
subcommand is executed before the command is executed, and the changed IP
routing protocol information, IP multicast routing protocol information, and
MPLS information are reflected to the operation.
GR2K-GA-0014
Ver. 07-02
Filtering/QoS Information
1-167