Subline Information (Wan); Table 4-7. List Of Initial Values That Can Be Set Using Subline Information (Wan Line) And Initial Values During Initial Installation - Hitachi GR2000 Series Configuration Commands

4.7.7

Subline Information (WAN)

Input Format
d e f a u l t
Parameters
The initial value items that can be set using subline Information (WAN) and the
initial values during initial installation are shown in Table 4-7. For details of each
parameter, refer to the configuration definition information in "subline (subline
Information)."
Table 4-7
Information
Group Name
Subline
information
(WAN line)
GR2K-GA-0014
Ver. 07-02
List of Initial Values That Can Be Set Using Subline Information (WAN Line)
and Initial Values During Initial Installation
Information Name
Selection of E1 physical layer multi-frame
format in E3
Setting value of E1 national multi-bit in E3 0 (hexadecimal)
Selection of E1 timeslot multi-line rate in
E3
Selection of T1 physical layer multi-frame
format in T3
Selection of T1 timeslot multi-line rate in
T3
Operation Management Information
Initial Value
CRC-4 Multiframe (crc4)
7 6 5
(2 : SI, 2 : Unused, 2 : Unused, 2
3 2 1
2 : SA-5, 2 : SA-6, 2 : SA-7, 2
64 kbps (64)
ESF (Extended Superframe) (esf)
64 kbps (64)
4
: SA-4,
0
: SA-8)
4-41