Hitachi GR2000 Series Configuration Commands page 169

6. Delete filter list number 9 of filter group name ip1:
(config)#
7. Delete filter group name ip1:
(config)#
Related Configuration Objects
Precautions
1. Set the filter list before setting the filter group.
2. The filter is executed in the order of the filter list numbers specified in the filter
group (order of display when
3. A maximum of 256 filter groups can be created, and the total filter conditions of
all groups must be 1024 or less.
4. The filter list number of the conditions under which packets are relayed and the
filter list number of the conditions under which all packets are discarded are
sequentially registered when only a specific packet is relayed. All packets are
relayed when the filter conditions under which all packets are discarded are not
registered.
5. When forwarding packets other than the specific ones to be discarded, register
only the filter list number of the discard condition.
6. More than one of the same filter list number cannot be registered in one filter
group.
7. A filter group being used in the filter interface cannot be deleted.
GR2K-GA-0014
Ver. 07-02
is executed.)
show filter-group
Filtering/QoS Information
1-127