Table 4-3. List Of Initial Value Items That Can Be Set Using Line Information; Table 4-5 List Of Initial Value Items That Can Be Set Using Line Information (Wan Oc-Pos) And Initial Values During Initial Installation - Hitachi GR2000 Series Configuration Commands

Table 4-5
Information
Information Name
Group Name
line Information Selection of synchronized clocks in
(WAN oc3pos
OC-POS)
Multi-CRC length in oc3pos
Selection of scramble disable/enable in
oc3pos
Setting value of SONET overhead in
oc3pos
Selection of synchronized clocks in
oc12pos
Multi-CRC length in oc12pos
Selection of scramble disable/enable in
oc12pos
Setting value of SONET overhead in
oc12pos
Selection of synchronized clocks in
oc48pos
Multi-CRC length in oc48pos
Selection of scramble disable/enable in
oc48pos
Setting value of SONET overhead in
oc48pos
Line operating mode in oc48POS
APS mode in oc48POS
APS return waiting time in oc48POS
APS protocol type in oc48POS
APS switchover direction in oc48POS
APS return mode in oc48POS
SD BER threshold value in oc48POS
SD BER threshold value in oc48POS
GR2K-GA-0014
Ver. 07-02
List of Initial Value Items that Can Be Set Using line Information (WAN
OC-POS) and Initial Values during Initial Installation
Operation Management Information
Initial Value
Synchronized with the clock in a local router.
(independent)
16 (bits)
Disable (oc3pos_scramble_off)
Refer to GR2000 Configuration Commands, (universal
CLI) Vol. 1, Setting Contents of SONET Overhead for
the CF010000 (hexadecimal) value.
Synchronized with the clock in a local router.
(independent)
16 (bits)
Disable (oc12pos_scramble_off)
Refer to GR2000 Configuration Commands, (universal
CLI) Vol. 1, Setting Contents of SONET Overhead for
the CF010000 (hexadecimal) value.
Synchronized with the clock in a local router.
(independent)
16 (bits)
Disable (oc48pos_scramble_off)
Refer to GR2000 Configuration Commands, (universal
CLI) Vol. 1, Setting Contents of SONET Overhead for
the CF010000 (hexadecimal) value.
Sonet
APS is not used. (oc48pos_aps_off)
300 (seconds)
JT-G783 Annex B (jt_g783_annex_b)
Bidirectional switching (oc48pos_bidirectional)
Non-return mode (oc48pos_non_revertive)
6
3
4-39