Hitachi GR2000 Series Configuration Commands page 347

Example
1. Setting parameters
The destination e-main address used for e-mail reports is set in
nobody@router-1.mydomain.co.jp.
The SMTP server used for e-mail reports is set in loghost.
Setting so that an e-mail report is sent to e-mail address logger@loghost by
device manufacturing number 1234.
2. Changing parameters
Setting the SMTP server used for e-mail reports in loghost port number 10025.
Setting the SMTP server used for e-mail reports in the default value when the
loghost port number is omitted
3. Displaying parameters
Displaying the settings.
4. Deleting parameters
Deleting destination e-mail address definitions.
GR2K-GA-0014
Ver. 07-02
Operation Management Information
4-17