Hitachi GR2000 Series Configuration Commands page 273

Description:
Default:
range of value:
Examples
1. Setting parameters:
To set the interface information for Ethernet to all four frame types:
Setting of interface for WAN (PPP):
Setting of interface for ATM or WAN (FR or ISDN)(when the interface is <DLCI
Name>, <VC Name>, or <Peer Name>):
Setting of interface for ATM or WAN (FR)(when the interface is <Group Name>)
ipx-arp is set to DLCI, Peer, or VC controlled under an interface.
2. Changing parameters:
To change the interface of WanLine1 to the watchdog spoofing response:
GR2K-GA-0014
Ver. 07-02
This parameter specifies the node address (MAC address)
assigned to this interface in a 12-digit hexadecimal number
only when the relevant interface is WAN or ATM.
None
IPX/Bridge Information
2-7