Hitachi GR2000 Series Configuration Commands page 101

[Normal packet flow detecting condition] and [Important packet flow detecting
condition]
1. When all high order protocol is target.
2. When the high order protocol is other than TCP, UDP, ICMP and IGMP.
3. When the high order protocol is TCP, UDP.
4. When the high order protocol is ICMP.
5. When the high order protocol is IGMP.
Note: 1: If the {normal packet flow detecting condition}, [premium {important packet flow
*
detecting condition}], and the operation specification (*1) are set or changed
simultaneously, input the operation specification after having input the {normal packet
flow detecting condition}, and [premium {important packet flow detecting condition}].
{important packet flow detecting condition}] must be changed. Input all the flow detecting
conditions and the operation specification again.
*1: If the "flow detecting condition" and the operation designation
GR2K-GA-0014
Ver. 07-02
2: When any parameter in the {normal packet flow detecting condition}, [premium
Filtering/QoS Information
1-59