Connecting A Setup Terminal To The Gr2000-B; Figure 4-40 Connecting A Setup Terminal To The Gr2000-B; Figure 4-41 Connecting The Rs-232C Cable - Hitachi GR2000-B Series Installation Manual

4.8

Connecting a Setup Terminal to the GR2000-B

An RS-232C cable is required to connect the GR2000-B to a setup terminal. The
cable must be a cross cable having 9-pin sub-D connectors (female) on each end (see
Section 3.3, "The Setup Terminal and Cable Connections" on page 3-19 for details).
Connect the RS-232C cable to the setup terminal in the same way as shown in
Figure 4-40 and Figure 4-41 below.

Figure 4-40 Connecting a Setup Terminal to the GR2000-B

Figure 4-41 Connecting the RS-232C Cable

GR2K-GA-0007
Rev. 5.00
Setup Terminal
or PC
9-Pin Sub-D Connector
CONSOLE
(RS-232C)
RS-232C
Cross Cable
Attachment Screws
Setup
4-27