General Safety Guidelines And Warnings - Avaya IG550 Installing And Configuring

Network cable specifications and pinouts

General Safety Guidelines and Warnings

The following guidelines help ensure your safety and protect the J-series router from damage.
The list of guidelines might not address all potentially hazardous situations in your working
environment, so be alert and exercise good judgment at all times.
Perform only the procedures explicitly described in this manual. Make sure that only
●
authorized service personnel perform other system services.
Keep the area around the chassis clear and free from dust before, during, and after
●
installation.
Keep tools away from areas where people could trip over them while walking.
●
Do not wear loose clothing or jewelry, such as rings, bracelets, or chains, which could
●
become caught in the chassis.
Wear safety glasses if you are working under any conditions that could be hazardous to
●
your eyes.
Do not perform any actions that create a potential hazard to people or make the equipment
●
unsafe.
Never attempt to lift an object that is too heavy for one person to handle.
●
Never install or manipulate wiring during electrical storms.
●
Never install electrical jacks in wet locations unless the jacks are specifically designed for
●
wet environments.
Operate the router only when it is properly grounded.
●
The separate protective earthing terminal provided on this product shall be permanently
●
connected to earth.
Replace fuses only with fuses of the same type and rating.
●
Do not open or remove chassis covers or sheet metal parts unless instructions are
●
provided in this manual. Such an action could cause severe electrical shock.
Do not push or force any objects through any opening in the chassis frame. Such an action
●
could result in electrical shock or fire.
Avoid spilling liquid onto the router chassis or onto any router component. Such an action
●
could cause electrical shock or damage the router.
Avoid touching uninsulated electrical wires or terminals that have not been disconnected
●
from their power source. Such an action could cause electrical shock.
In addition, observe the warnings and guidelines in the following sections.
148 Installing and Configuring the IG550 Integrated Gateway