Table of Contents
Advertisement
Section 8 : Special Original
Original Size
The copier usually detects the standard size of originals fed through RADF or positioned
on the platen glass (STD size mode).
Use Non STD size mode to specify the scanning area manually for copying or printing
special size originals. Use Tab paper mode to copy tabbed original including the image
on the tab part onto tabbed copy paper.
Specifications for Original Size
❒ Scanning sizes in Non STD size mode: A3, B4, F4, A4R, B5R, A4, B5, A5R, 11"x17",
8.5"x14", 8.5"x11"R, 8.5"x11", WHOLE AREA
❒ Original sizes in Tab paper mode: B4, F4, A4R, A4, B5, 8.5"x14", 8.5"x11"R, 8.5"x11"
❒ Incompatible Basic Copying Conditions: Folding, Stapling & Folding, or Trimming with
Booklet, Punching
❒ Incompatible Special Originals: Mixed original (Non STD size and Tab paper cannot be
selected at the same time.)
❒ Incompatible Applications: Combination, Booklet, Dual page, Non-image area erase,
Image shift, Storing images in Overlay memory
Procedure
1
Set Copying Conditions
1 Close the RADF securely, then press [ AUTO RESET ].
2 Touch SPECIAL ORIGINAL on the Basic Screen to display the Special Original Screen.
3 Touch Non STD size or Tab paper .
4 Touch the desired size key. When selecting WHOLE AREA on the Non STD size
mode menu, the copier scans the whole area of the platen glass and copies with the
paper size or magnification ratio currently selected.
Special Original Screen (with Non STD size selected)
Popup menu for Non STD size mode
5 Touch OK on the popup menu of the size keys.
6 Touch OK to complete the setting and return to the Basic Screen.
The SPECIAL ORIGINAL key on the Basic Screen appears highlighted.
8 - 20
Popup menu for Tab paper mode
Advertisement
Table of Contents
