Language Select Setting [2] - Konica Minolta 7075 Instruction Manual

Section 12 : Key Operator Mode
System Initial Setting [1] (continued)

Language Select Setting [2]

Select the language used in the LCD (English).
❒ Default setting: English
System Initial Setting Menu Screen
Procedure
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen.
NOTE:
If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 Touch [1] System initial setting to display the System Initial Setting Menu Screen,
then touch [2] Language select setting to display the Language Selection Screen.
3 Touch Japanese
4 Touch OK to complete the setting and return to the System Initial Setting Menu
Screen.
5 If no further changes are required, proceed to step 7.
6 If other system initial settings are required, touch desired key.
7 Touch PREVIOUS SCREE N to restore the Key Operator Mode Screen.
8 Touch PREVIOUS SCREEN to restore the Basic Screen to perform copying operations.
12 - 8
English .
or
Language Selection Screen