Table of Contents
Advertisement
Section 11 : Server Function
Server Function
Use the Server function with HDD to accumulate scanned images into built-in DIMM
(memory), then store the image data in HDD*
DIMM, and then output as needed. This function also allows storing the image data in
normal copying procedure.
Use the Server function with a PC*
(memory) in a PC, transmitting the image data to a PC over a network. The image data
can be recalled from a PC to DIMM and output as needed. This function also allows you
to edit the image data on a PC and transmit the edited data to DIMM for printing.
Even when the machine is connected with several PCs over a network, this function can
be used with only one PC.
NOTES:
*1: Installation of the optional HDD (HD-102) is required for the Server function with HDD.
*2: As for the detailed information on the Server function with a PC, contact your service
representative.
Scan
Output
DIMM
Store
HDD
Server Function with HDD
The Server function provides the following four modes:
q Image Store/Delete mode
Store the image data scanned from originals in HDD/PC, or delete the data stored in
HDD/PC.
w Image Store & Output mode
Store the scanned image data in HDD after copying is completed.
e Image Recall mode
Recall the image data stored in HDD/PC to built-in DIMM for printing.
r Image Edit mode
Edit the image data by PC.
NOTE:
If any trouble occurs in the optional HDD, the data stored in the HDD may not be recalled perfectly.
It is recommended that any important data should be copied in the external PC periodically using
JobEditor. Contact your service representative for detailed information.
11 - 2
1
(option) so that the data can be recalled to
2
to store the image data accumulated in built-in DIMM
Output
Read
Scan
Read
DIMM
Store
HDD
Server Function with PC
Edit
Advertisement
Table of Contents
