Table of Contents
Advertisement
Image Store/Delete Mode
When the original image is stored into DIMM, use this function to store the image data into
the HDD/PC. In the event data is already stored in the HDD/PC, use this function to
transmit it from HDD to PC or delete it from HDD/PC.
NOTES:
• Installation of the optional HDD (HD-102) is required for storing data in the HDD.
• To store data in PC, the machine should be connected to PC by cross-cable, or with network
provided that a specific software for using Server function is installed in PC.
• The above two conditions should be fulfilled for transmitting data from HDD to PC.
To Store Image Data in HDD/PC
Specify your password when storing the data in HDD/PC for protection. Each image data
can be given an alphabetical job name.
❒ Incompatible Basic Copying Conditions: 1s2, 2s2, AMS, Selecting output mode,
Selecting paper size (APS is automatically selected), Setting print quantity, Rotation
❒ Incompatible Special Originals: WHOLE AREA in Non STD Size
❒ Incompatible Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP
Interleave, Image Insert, Dual Page, Program Job (available in Image Store & Output
mode only), Non-Image Area Erase, Reverse Image, Repeat, AUTO Layout, Image
Shift, Stamp, Overlay
Procedure
1 Press [ MODE ] to light up the [ SCANNER/SERVER ] LED. The Scanner/Server Setting
Menu Screen will be displayed.
2 Touch IMAGE STORE/DELETE to display the Image Data Store/Delete Site Selection
Screen.
COPY
SCANNER / SERVER
PRINTER
CHECK
HELP
JOB MEMORY
AUTO RESET
C
3 Touch SCANNER→HDD . The Image Data Password Entry Screen will be displayed.
NOTE:
For detailed information on deleting an image data from PC, contact your service representative.
Image Data Store/Delete Site Selection Screen
Scanner/Server Setting Menu Screen
Section 11 : Server Function
Server
Function
Image
Store/Delete
11
11
S erver
S erver
Function
Function
11 - 3
Advertisement
Table of Contents
