Table of Contents
Advertisement
Memory Switch Setting [13] (continued)
[31] Auto select of Booklet copy
Set the copier with FS-108BM mounted to automatically select the Booklet mode when
Stapling & Folding or Folding output mode is selected.
[32] E.K.C. password
Select the acceptable number of digits for the EKC master key code.
[33] Arrow key change (Image Shift)
Select the 1 step unit of the touch key to specify the shift amount in Image shift.
[34] Exit direction of 1 sheet
Select to exit face up or face down when making only 1 sheet of copy.
[35] An interruption suspended way
Select the timing to stop the job in progress when [ INTERRUPT ] is pressed.
[36] E.K.C. password input timing
Set the input timing for the EKC password.
[37] Key click sound (No paper/JAM)
Select the duration of the buzzer for alerting that the machine has stopped being out of
paper or due to paper misfeed.
[38] Reserve copy function
Set the timing for the reserve job setting.
[39] Scan stop by a pull out tray
Select to stop or continue the scanning job when a tray is pulled out.
[40] Change page no. pos. (booklet)
Set the machine to position the page numbers automatically on the outside edges of the
copy when using Booklet with Page Numbering in Stamp.
[41] Trimmer (STD/ Non STD size)
Set the machine to allow trimming the folded or stapled & folded sheets in non-standard
size (or wide size).
[42] Timer which prohibits Printer
Set the timer to allow the printing job after operating the copying job.
[43] Bookmark function
Select to set the Bookmark function only for the current job, set for all the following jobs,
or deactivate the function.
[44] Side 2 print (STD repeat + zoom)
Select to activate or deactivate the function to rotate the back pages by 180° automatically
in duplex copying with magnification changed and the STD repeat selected.
[45] Delete of overlay image
In Overlay Memory setting, select to permit or prohibit deleting the selected image data
previously stored in HDD, and also overwriting the data of the same name when storing
new data in HDD.
Section 12 : Key Operator Mode
Memory
Switch Setting
12
Key Operator
Mode
12 - 43
Advertisement
Table of Contents
