Table of Contents
Advertisement
1
Section 1 : Introduction
Introduction
Features of the Konica 7075 (continued)
• Density Shift
Shift each seven density levels of 4 density modes (Auto, Text, Photo, Increase Contrast)
into two levels to lighter and three levels to darker.
• Dual Page
Copy both pages of an open book or book-size sheet separately onto two A4 sheets in
1s1 mode or separately onto each side of one A4 sheet in 1s2 mode. You can use the
Dual Page mode with the Front or Front/Back cover mode. The cover page(s) will be
scanned and copied normally before image division is performed on the other pages.
• Frame/Fold Erasure
Erase border and/or fold image area using Frame (1 - 15mm), Fold (1 - 30mm), or Frame
& Fold.
• HDD Store
While operating ordinary copying job, store image data in HDD (option) for future printing.
• Image Insert
Store pages in memory from the platen glass, and insert the pages into a document
copied from the document feeder.
• Image Rotation
Image Rotation rotates the image before copying when the portrait/landscape orientation
of the original is different from the orientation of the copy paper.
In 1-2 copy mode, Rotation arranges the even pages of simplex originals so that the
reverse sides of the duplex copies appear upside down.
In 2-1 copy mode, Rotation rearranges the reverse sides of duplex originals, when the
reverse side is upside down, so that they can be read as normal simplex copies.
• Image Shift
Create or remove a binding margin (shift amount from 0 ~ 250mm in 1mm increments);
reduce image to prevent image loss (reduce & shift amount from 0 ~ 250mm in 1mm
increments).
• Interrupt Copying
Interrupt copying in progress to perform copying from the platen glass or document feeder.
• Job Memory
Program up to 30 jobs and recall each job by job number, as needed. All compatible
platen glass functions can be programmed into Job Memory directly after they are selected.
• Job Status
Display the Job Status Screen to view the machine status, change the operation order of
reserve jobs, delete the unused reserve job, or display the previous job list.
• Lens Mode (Preset, Zoom)
Select Preset ratios, three reduction and three enlargement ratios.
Zoom ratios can be selected from 33% ~ 400% in 1% increments (400dpi), or 33% ~
200% in 1% increments (600dpi).
• Machine Status Confirmation
Display the current machine status on LCD for confirmation.
1 - 3
Advertisement
Table of Contents
