Table of Contents
Advertisement
Section 12 : Key Operator Mode
Paper Type / Special Size Set [6] (continued)
To specify special size;
(1) Touch Special size setting on the Paper Type Setting Screen to display the Special
Size Setting Screen.
(2) Touch the desired paper tray to highlight it.
(3) Touch a paper size key to specify a paper size for the selected tray.
• Select STD size to allow the machine to automatically detect the size of paper
loaded in the tray and indicate it on the tray key.
• Select STD size (special) to display the popup menu to show available paper sizes
to be specified. Use arrow keys on the popup menu to select the desired size.
• Select Non STD size to display the popup menu to enter the paper size by using
arrow keys or touch screen keypad.
• Select Wide size paper to display the popup menu to show available wide paper
sizes to be specified. Use arrow keys on the popup menu to select the desired
wide size, then touch Input size to display the popup menu to enter the paper size
by using arrow keys or touch screen keypad.
Touch Lead edge or Rear edge to select the image starting position.
3 Touch OK on the Paper Type Setting Screen or on the Special Size Setting Screen
to complete the setting and return to the Key Operator Mode Screen.
4 If other key operator settings are required, touch desired key, from [1] to [18].
5 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
12 - 24
Advertisement
Table of Contents
