Table of Contents
Advertisement
Section 10 : Job Memory
Job Recall
Use Job Recall to recall jobs that are already stored in Job Memory.
Procedure
1 Place original(s) as required for the job you are about to recall.
2 Press [ JOB MEMORY ] to display the Job No. Selection Screen.
Control Penel
SCANNER / SERVE
PRINTER
CHECK
HELP
JOB MEMORY
AUTO RESET
3 Touch a Job No. key to select a job you want to recall, and to highlight the key.
If required, scroll with the arrow keys to reach the desired Job No. key (1~30).
To cancel the recall mode, touch CANCEL to return to the Basic Screen.
4 Touch JOB CHECK . The Job Recall Check Screen displays to enable you to review
the settings. Touching CANCEL on the Job Recall Check Screen returns to the Job
No. Selection Screen.
Job Recall Check Screen
5 When the desired Job No. key is highlighted, touch OK on the Job No. Selection
Screen to read the settings of the selected job, and to return to the Basic Screen.
To cancel the job, press [ AUTO/RESET ].
NOTES:
1 A locked job is indicated by a lock icon (
2 Only the key operator can lock a job.
3 A locked job cannot be overwritten unless it is unlocked by the key operator.
4 A blank key indicates that no job is stored under that key.
5 The sixteen asterisks displayed on a Job number key indicates that a job is stored but unnamed.
6 Job Memory entries can be recorded on the Job Memory Form included at the end of this
section.
10 - 4
Job No. Selection Screen
) on the Job key number.
Advertisement
Table of Contents
