Table of Contents
Advertisement
Section 6 : Basic Operations
Store Mode (continued)
Platen Store Mode (continued)
3
Place/Scan Originals on the Platen Glass ... FACE DOWN
1 Open the document feeder.
2 Place original FACE DOWN on the platen glass, then close the document feeder.
IMPORTANT:
PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
NOTES:
• For details on positioning original, see p. 4-2.
• For original and copy paper information, see Section 4.
• When Dual page, Non-image area erase, Auto detection mode of Repeat, or AUTO layout is
selected, keep the document feeder open throughout the procedure so that the selected function
can operate properly.
3 Press [ START ] to scan and store the data into memory.
4 Repeat steps 1 to 3 until all originals are scanned.
Memory indicator on the upper right of the Basic Screen allows you to check the
remaining memory.
Basic Screen
NOTES:
• See p. 14-4 if memory overflow occurs.
• To delete the scanned data without printing, press [STOP], then touch EXIT on the confirmation
screen to be sure the data is deleted.
6 - 30
Advertisement
Table of Contents
