How To Access The Key Operator Mode - Konica Minolta 7075 Instruction Manual

Key Operator Mode (continued)

How to Access the Key Operator Mode

Procedure
1 Press the [ HELP ] button on the Control panel to display the Help Screen.
2 Then, touch the Key Operator Mode on the Help Screen.
The Key Operator Password Entry Screen displays when the 4-digit key operator
password is set by service.
Otherwise, the Key Operator Mode Screen displays without the password requirement.
3 If the Key Operator Password Entry Screen is displayed, use the keypad on the
touch screen to enter your 4-digit key operator password; then touch OK , to display
the Key Operator Mode Screen. (See note.)
If the key operator password is not valid, check with your service representative.
4 To display menus [11] to [18] of the Key Operator Mode Screen, touch the lower
arrow key. To return the menu [1] to [10] of the Key Operator Mode Screen, touch the
upper arrow key.
5 Make setting changes from the Key Operator Mode Screen, as described on the
following pages.
NOTE:
If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
Section 12 : Key Operator Mode
Key Operator
Mode
12
Key Operator
Mode
12 - 3