Table of Contents
Advertisement
Section 6 : Basic Operations
How to Make a Basic Copy (continued)
4
Position Originals ... FACE UP in RADF
Position original document FACE UP in the document feeder or FACE DOWN on the
platen glass.
HINTS:
• For details on positioning originals, see p. 4-2 and p. 4-4.
• For original and copy paper information, see Section 4.
5
Start Copying
Press [ START ] to scan.
Memory indicator on the upper right of the Basic Screen
allows you to check the remaining memory.
Printing job starts in succession when the machine
becomes ready for output.
NOTE:
During the process of successive copying jobs, the message
"Warming up" may be displayed in the message area of the Basic
Screen to maintain the copy image quality.
To suspend the scanning or printing job, press [ STOP ].
The machine immediately stops the operation in progress, and displays a confirmation
screen to ask you whether to continue or terminate the current job.
Touch CONTINUE to go on, or EXIT to delete all the data for that job.
After copying is completed, all the scanned data will be deleted automatically.
Press [ AUTO RESET ] to release the mode and reset the machine.
CAUTION
When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets while the paper is exiting; otherwise, mishandled
paper will occur.
6 - 4
FACE DOWN on Platen Glass
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
TIM
POWER
ON /
Advertisement
Table of Contents
