Table of Contents
Advertisement
Section 9 : Applications
Overlay (continued)
3
Position Original(s) ... FACE UP in RADF
1 Position the overlaying original in the document feeder or on the platen glass, then
press [ START ] to scan.
2 The second and subsequent pages are to be overlaid in printing. Place them in the
document feeder or on the platen glass, then press [ START ].
IMPORTANT: PLACE AND SCAN THE ORIGINALS IN REGULAR ORDER OF PAGINATION.
HINT:
For details on positioning originals, see p. 4-2 and p. 4-4.
4
Start Copying
Touch STORE to deselect the Store mode, then press
[ START ].
The copier will start printing when ready for output.
To suspend the printing job, press [ STOP ].
After copying is completed, all the scanned data will be
deleted automatically.
Press [ AUTO RESET ] to release the mode and reset the
machine.
CAUTION
When the finisher / trimmer unit / paper exit tray capacity is exceeded due to the print
quantity selected, remove the copied sets as they exit; otherwise, mishandled paper will
occur.
9 - 62
FACE DOWN on Platen Glass
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
TIM
POWER
ON /
Advertisement
Table of Contents
