Table of Contents
Advertisement
Section 9 : Applications
Non-Image Area Erase (continued)
4
Start Copying
Press [ START ] to scan.
Printing job starts in succession when the machine
becomes ready for output.
To suspend the scanning or printing job, press [ STOP ].
After copying is completed, all the scanned data will be
deleted automatically.
Press [ AUTO RESET ] to release the mode and reset the
machine.
CAUTION
When the finisher / paper exit tray capacity is exceeded due to the print quantity selected,
remove the copied sets as they exit; otherwise, mishandled paper will occur.
9 - 36
INTERRUPT
PROOF COPY
STOP
CLEAR QTY.
START
TIM
POWER
ON /
Advertisement
Table of Contents
