Table of Contents
Advertisement
Booklet (continued)
6 Select additional Applications, as desired.
• Using the Reduce & shift mode of Image shift will make
a binding area in the centre of the copies, as shown on
the right.
See p. 9-51 to p. 9-54 for details of Reduce & shift
mode.
• Key operator can set the machine to position the page
numbers automatically on the outside edges of the copy
when using Booklet with Page Numbering in Stamp.
See p. 12-39 to p. 12-43.
7 Touch OK on the Application Selection Screen to
complete the setting and return to the Basic Screen.
8 Select the 1-2 or 2-2 copy mode.
9 AMS is selected automatically.
When selecting any tray other than the tray that is set and displayed on the Basic
Screen, touch the desired tray key on the Basic Screen. To release AMS, select the
desired magnification, then select paper size.
10 If the copier is equipped with FS-108BM Finisher, Folding or Stapling & Folding
output mode is available. Follow the procedure below.
(1) Touch OUTPUT MENU on the Basic Screen to display the Finisher Mode Selection
Screen, then touch MAIN TRAY to highlight it.
(2) Touch STAPLING & FOLDING or FOLDING , as desired.
When selecting STAPLING & FOLDING , the machine with the Trimmer unit
installed selects TRIM automatically. To cancel the trimming mode, touch TRIM
to deselect it.
When selecting FOLDING , the machine with the Trimmer unit installed does not
select TRIM . Touch TRIM to highlight it, if desired.
NOTE:
Selecting FOLDING or STAPLING & FOLDING will automatically switch the output tray to
Booklet tray. Notice that the arrow pointing to the MAIN TRAY shifts to the Booklet tray.
(3) Touch OK on the Finisher Mode Selection Screen. The Basic Screen will be
restored with the OUTPUT MENU highlighted.
Finisher Mode Selection Screen
3
Enter Print Quantity
Enter the desired print quantity, using keypad.
To change the print quantity, press [C (CLEAR QTY.)] and enter the correct quantity.
Section 9 : Applications
Booklet
Booklet + Reduce & Shift
9 - 17
Booklet
9
Applications
Advertisement
Table of Contents
