Scanning; When Original Size Cannot Be Detected - Konica Minolta 7145 Internet Fax / Fax Operations

Scanning

When Original Size Cannot be Detected

If the size of the original cannot be detected, the following screen is displayed. Set the original
size when this screen is displayed.
1.
Press the original size key.
2.
Press OK.
When Memory Capacity is Exceeded
Using memory transmission, if a large number of pages are sent of if the images on the
originals are especially detailed, memory capacity may be exceeded due to the amount of
data attempting to be stored in memory. When this happens, transmit the document by
selecting Quick Memory Tx (you can select the Quick Memory Tx by clearing Memory Tx
in the Fax Application screen).
HINT
For detail, see "Error Message Displayed" (p. 8-4)
Simple FAX
Transmission
Placing the Original
on the Machine
Setting Transmission
Conditions
Selecting a
Remote Station
Scanning
Transmitting
Reserving
Transmission
Manual Transmission
Cancelling
Transmission
Confirming Reserved
Documents
Confirming
Communication Results
Memory
Transmissions
Total Page Set
Timer
Transmission
International
Communication
Sender
Information
6-23