Copier Features
Standard Equipment
Main Body with 3 Paper Trays (500/500/1,000 sheets)
Reversing Automatic Document Feeder (RADF) (DF-313)
Automatic Duplex Unit (ADU)
Configuration Options:
with Multi-Sheet Bypass Tray (150 sheets)
Optional Equipment
Stapler Finisher (FS-108)
This finisher is equipped with two exit trays.
Secondary (sub) tray: Four output types can be specified on the Finisher Mode Selection
Screen.
(1) Face down non-sort exit
(2) Face up non-sort exit
(3) Face down group exit
(4) Face up group exit
Primary (main) tray: Four output types can be specified by STAPLE SORT and SORT
keys on the Basic Screen and by the setting on the Finisher Mode Selection Screen.
Face up exit is not available.
(1) Sort exit
(2) Staple sort exit
(3) Non-sort exit
(4) Group exit
Stapler Finisher (FS-108BM)
This finisher is equipped with three exit trays and a cover sheet feeder (option).
Secondary (sub) tray: Four output types can be specified on the Finisher Mode Selection
Screen.
(1) Face down non-sort exit
(2) Face up non-sort exit
(3) Face down group exit
(4) Face up group exit
Primary (main) tray: Four output types can be specified by STAPLE SORT and SORT
keys on the Basic Screen and by the setting on the Finisher Mode Selection Screen.
Face up exit is not available.
(1) Sort exit
(2) Staple sort exit
(3) Non-sort exit
(4) Group exit
Booklet tray: Stapled and folded, or simply folded booklets are to be delivered onto this
tray. These two finishing modes can be specified on the Finisher Mode Selection Screen.
Trimmer unit tray: This tray is attached to a trimmer unit (option) installed on the stapler
finisher (FS-108BM). Folded or stapled & folded trimmed booklets are delivered to this
tray.
Section 1 : Introduction
1 - 7
1
Introduction