Table of Contents
Advertisement
Image Shift (continued)
Image Shift Selection Screen
7 To set shift amount in Reduce & Shift:
(1) Touch FRONT . In Reduce & Shift mode, the BOTH SIDES key appears dimmed
to show inactivity.
The message "Select magnification ratio on FRONT side" will be displayed when
BACK is selected first.
NOTES:
• The shift amount specified for the front page determines the magnification ratio.
• When selecting 1s1 or 2s1 copy mode in step 2, setting for back side is not needed and
will be ignored, if specified.
(2) Touch UP SHIFT , DOWN SHIFT , or RIGHT SHIFT to specify the shift direction. In
Reduce & Shift mode, the LEFT SHIFT key with FRONT selected appears dimmed
to show inactivity.
Use the touch screen keypad or up/down arrow key to select the desired shift
amount (available range: 0~250mm). Keep touching the arrow key to increase or
decrease the value continuously.
The AMS will automatically determine the magnification ratio according to the
shift amount specified for the front page. The shift amount and magnification ratio
determined for the front page will be automatically applied to the back page.
(3) Touch BACK and make direction and amount change, if any positioning adjustment
is required.
With BACK selected, the magnification ratio will not be changed, while the direction
and amount can be altered.
Image Shift Selection Screen
8 When Booklet or 2 Repeat mode of Repeat has been already selected, the PAGE
SPACE key appears clear on the screen to show its availability, with PAGE SPACE
indication displayed in the image area.
If desired, touch PAGE SPACE to highlight it, then enter the desired amount using
the touch screen keypad or up/down arrow key.
Section 9 : Applications
9 - 53
Image Shift
9
Applications
Advertisement
Table of Contents
