Table of Contents
Advertisement
Section 4 : Paper Information
Positioning Originals on the Platen Glass
Positioning an Original for Manual Copying
Use the platen glass when originals are not suitable for use with the document feeder,
e.g., when size is incompatible, or when originals are folded, stapled, torn, or in generally
poor condition.
Specifications
❒ All capacities are stated for 80g/m
❒ Max. original size: A3, sheet or book
❒ Max. book weight/thickness: 6.8kg / 30mm
❒ Original placement: Face down on right depth side of glass
Procedure
1 Raise the document cover, as shown in the illustration above.
2 Place original FACE DOWN in the right rear corner, aligning the edge with the right
measuring guide.
3 Gently close the document cover, to prevent the original from shifting on the glass.
CAUTION:
When the finisher/paper exit tray capacity is exceeded due to the print quantity selected,
remove the copied sets while the paper is exiting; otherwise mishandled paper will occur.
TIP:
To eliminate black copy marks on edges when copying from a book without selecting Dual Page
mode, select Frame/Fold Erasure or Non-image Area Erase in Application mode.
4 - 2
2
paper
Advertisement
Table of Contents
