Table of Contents
Advertisement
Program Job
In the ordinary Store mode, the combined features selected for the job are applied to all
originals to be scanned. In the Program Job mode, you may scan multiple sets of originals
and apply different settings on each set (referred to as JOB), then output them all as a
complete set.
❒ Scan and store originals into memory, then print all the pages collectively.
❒ Max. 100 JOBs can be programmed for an output job.
❒ Available original sizes vary conforming to copy conditions selected for each JOB.
❒ Paper size specified for the first JOB cannot be changed. Only the trays containing the
same paper size can be designated for subsequent JOBs.
Once specified, paper type/size setting for Multi-sheet bypass tray cannot be changed
for another JOB.
❒ Output mode settings cannot be specified for each JOB. The last settings made will be
applied to all JOBs.
❒ Print quantity cannot be specified for each JOB. Entered quantity will be the number of
complete copied sets and can be changed anytime before printing.
❒ The image data scanned into memory using Program Job mode can be stored in HDD
using Image Store & Output Mode in server function. See P. 11-8 to p. 11-10.
❒ Program Job settings cannot be stored in Job Memory.
❒ Incompatible Basic Copying Conditions: APS, Change paper size, Rotation, Group,
Rotation Sort, Rotation Group, Folding, Stapling & Folding, Trimming, Server function
❒ Incompatible Special Originals: Using Normal/High/Very High with 600dpi, Mixed Original
❒ Incompatible Applications: Sheet/Cover Insertion, Chapter, Combination, Booklet, OHP
Interleave, Image Insert, Dual Page, 2/4/8 Repeat in Repeat, Overlay, Storing image in
Overlay Memory
1 2
Original A
5 6
5 6
3 4
3 4
1 2
1 2
Original B
Original C
Section 9 : Applications
9 10
7 8
Dual Page
Program Job
9
9
Applications
Applications
9 10
7 8
5 6
3 4
1 2
5 6
3 4
1 2
1 2
Copied set
9 - 31
Advertisement
Table of Contents
