Automatic Magnification Selection (Ams) - Konica Minolta 7075 Instruction Manual

Section 6 : Basic Operations
Lens Mode (continued)

Automatic Magnification Selection (AMS)

AMS is one of the initial settings that functions when the RADF is used and Paper Size
is selected manually.
❒ Incompatible: APS, Change magnification, Dual page, Non-image area erase, Repeat,
AUTO layout, Storing image in Overlay Memory
An appropriate reduction or enlargement ratio will be selected automatically and applied
to the image on the paper size. AMS automatically calculates and selects the correct ratio.
Wide paper size can be specified when AMS functions. In this case, the same magnification
ratio as that of the standard size will be selected automatically.
AMS ratios are shown in the table below.
A3
A 3
1.00
B 4 R 0.86
A 4 0.50 (0.71) 0.58 (0.82) 0.64 (0.90) 1.00 (0.71) 0.71 (1.00) 1.15 (0.82) 0.82 (1.15) 1.41 (1.00) 1.00 (1.41)
A 4 R 0.71
B 5 0.43 (0.61) 0.50 (0.71) 0.55 (0.78) 0.86 (0.61) 0.61 (0.86) 1.00 (0.71) 0.71 (1.00) 1.22 (0.86) 0.86 (1.22)
B 5 R 0.61
A 5 0.35
A 5 R 0.50
6 - 14
Original size
B4 F4 A4
1.15 1.27 1.00
1.00 1.10 0.86
0.82 0.90 0.71 (1.00)
0.71 0.78 0.61 (0.86)
0.41 0.45 0.71
0.58 0.64 0.50
( ) is the magnificaton ratio of the Image rotation.
A4R B5 B5R
1.41 1.15 1.63
1.22 1.00 1.41
1.00 0.82 (1.15) 1.15
0.86 0.71 (1.00) 1.00
0.50 0.81 0.58
0.71 0.58 0.81
A5 A5R
1.41 2.00
1.22 1.73
1.00 1.41
0.86 1.22
1.00 0.71
0.71 1.00