Table of Contents
Advertisement
Section 11 : Server Function
Image Edit Mode (continued)
6 Press [ START ] to scan.
After scanning is completed, the Image Data Edit Screen will be displayed to indicate
that the scanned image data is ready for transmission.
Image Data Edit Screen
NOTE:
To stop the Image Edit operation while the Image Data Edit Screen is displayed, touch EXIT. If the
popup menu shown below i displayed, touch YES to cancel the editing job and delete the data;
or touch NO to continue.
Image Data Edit Screen (popup menu displayed)
7 Perform the data transmission procedure on PC, then edit the image data as required.
When completed, make a setting on PC to return the edited data to DIMM. The Basic
Screen will be restored.
NOTE:
For details, refer to the instruction manual for Image Edit mode.
8 Press [ START ]. The copier starts the printing job.
After printing is completed, edited data is deleted automatically.
11 - 16
Advertisement
Table of Contents
