Table of Contents
Advertisement
Section 9 : Applications
Image Insert (continued)
2
Set Copying Conditions
1 Close the RADF securely, then press [ AUTO RESET ].
2 Touch APPLICATION on the Basic Screen to display the Application Selection Screen.
3 Touch Image Insert to display the Image Insertion No. Setting Screen.
Application Selection Screen
Image Insertion No. Setting Screen
4 Use the keypad to enter the page numbers for up to 30 insertion locations, touching
SET after each entry.
• When a page number is larger than the total original count, a sheet is inserted as
the last page.
• Entering the same page number twice will insert two sheets at that location.
• Insertions occur in sequence, even if page numbers are entered out of sequence.
• To clear an incorrect entry, touch DELETE or [ C (CLEAR QTY.) ], then enter the
correct page number.
• When setting more than 15 locations, touch the arrow key to move to the next
page.
OPTION:
Touch Booklet on the Image Insertion No. Setting Screen to use this function.
5 When all page number entries are made, touch OK .
The Application Selection Screen will be restored.
6 Make additional Application selections, or touch OK to return to the Basic Screen.
The STORE key on the Basic Screen appears highlighted to show that the Store
mode is automatically selected.
9 - 24
Advertisement
Table of Contents
