Table of Contents
Advertisement
Section 4 : Paper Information
Using the Reversing Automatic Document Feeder (RADF) (continued)
Positioning Originals
The document feeder (RADF) automatically feeds up to 100 originals directly to the platen
glass, starting with the top sheet. The RADF should only be used for unstapled, unfolded,
smooth, flat originals.
Specifications
❒ Original size detection requires accurate paper guide adjustment.
❒ Size, weight, and capacity are specified for all copy modes on p. 4-3.
Procedure
Before placing originals in the tray, be sure the document feeder is closed fully.
1 Position original(s) FACE UP on the document feeder tray.
Place two-sided originals with page one FACE UP.
2 Adjust paper guides.
Positioning an SDF Original
In the SDF mode, one thick original can be fed through the RADF original tray. See p. 8-
17 for details of the SDF mode.
Procedure
Before placing the original in the tray, be sure the document feeder is closed fully.
1 Select the SDF mode.
2 Position an original FACE UP on the document feeder tray.
3 Adjust paper guides.
4 - 4
Advertisement
Table of Contents
