Table of Contents
Advertisement
Cover Sheet Feeder
The Cover Sheet Feeder (PI-108) is available as an option on the FS-108BM finisher.
Load cover sheet paper into this device and use the sheets as front covers for copied sets
output to the Main tray; or use the sheets as booklet type covers for copied sets output to
the Booklet tray in the Folding or Stapling & Folding mode.
NOTES:
• Paper loaded into the cover sheet feeder cannot be copied.
• This function is incompatible with cover sheet mode (COVER WITH COPY SHEET and COVER
WITH BLANK SHEET) in Booklet and Sheet/Cover Insertion.
❒ Incompatible Basic Copying Conditions: Output to secondary (sub) tray, Rotation Sort,
Rotation Group
❒ Incompatible Special Originals: Mixed Original with APS
❒ Incompatible Applications: Cover Sheet mode in Booklet
Procedure
1 Close the RADF securely, then press [ AUTO RESET ].
2 Touch OUTPUT MENU on the Basic Screen to display the Finisher Mode Selection
Screen.
Finisher Mode Selection Screen
3 Touch MAIN TRAY to highlight it, and then touch COVER SHEET to display the Cover
Sheet Insert Selection Screen.
Copied set with
cover attached
Copied sets with cover
attached in Folding or
Stapling & Folding mode
Section 7 : Output Modes
Cover sheet
7 - 21
7
7
Output
Output
Modes
Modes
Punching /
Z-Folding
Cover Sheet
Feeder
Advertisement
Table of Contents
