Table of Contents
Advertisement
Section 6 : Basic Operations
Rotation (continued)
180° Rotation
In 1s2 copy mode, this function arranges the even pages of the simplex portrait originals
upside down on the reverse side of duplex copies.
In 2s1 copy mode, this function arranges the reverse sides of duplex portrait originals
which read upside down to make normal simplex copies.
❒ 180° Rotation functions when 1s2 or 2s1 copy mode is selected, and the originals are
placed in the landscape orientation.
❒ This function is effective for portrait originals. For landscape originals, this function may
not result satisfactorily.
❒ Paper size: A4, A4R, B5, B5R
❒ Incompatible Basic Copying Conditions: 1s1, 2s2
❒ Incompatible Special Originals: Resolution (Very high)
❒ Incompatible Applications: Dual page, Non-image area erase, Repeat except 2/4/8
Repeat, Auto layout, Storing image in Overlay memory
To Release Automatic Rotation
The copier is initially set to activate the Rotation function automatically.
To release automatic Rotation:
Basic Screen
Touch ROTATION OFF on the Basic Screen to highlight it. The Rotation icon will
disappear to indicate that the Rotation function is cancelled.
NOTE:
ROTATION OFF is initially set to activate/deactivate 90° Rotation only. If desired, key operator
can set ROTATION OFF to activate/deactivate 180° Rotation also. See p. 12-39 to p. 12-43.
To resume automatic Rotation:
Touch ROTATION OFF on the Basic Screen to deselect it. The Rotation icon will be
displayed and the Rotation function will be reactivated.
6 - 36
Advertisement
Table of Contents
