Table of Contents
Advertisement
Using the Reversing Automatic Document Feeder (RADF) (continued)
Positioning Mixed Originals
Mixed size originals can be copied together from the document feeder in either APS mode
or AMS mode. In APS mode, copies will be output on mixed paper sizes to match the
originals. In AMS mode, copies will be output on one common paper size that you select
in which case an appropriate AMS magnification ratio will be selected automatically. To
use the Mixed original mode, see procedure on p. 8-12 to p. 8-14.
Procedure
Before using the Mixed Original mode, be sure the document feeder is closed completely.
1 Arrange originals in order, and place them as described below:
Place A3/B4 originals face up or side 1 up in the document feeder, in landscape
orientation, i.e., with short edge feeding.
Position A4 and B5 sizes in either portrait or landscape orientation.
Position A5 size in landscape orientation except only mixed B5R size original.
2 Position mixed originals FACE UP, aligned with the left rear side of the RADF tray.
3 Adjust paper guides to originals.
Align originals to the back left corner.
Section 4 : Paper Information
4
Paper
Information
4 - 5
Advertisement
Table of Contents
