Set Reserve Job; Reserve - Konica Minolta 7075 Instruction Manual

Reserve

Set Reserve Job

The Reserve function allows you to set up a new job while a current (scan/print) job is in
process. When the current job is finished, the Reserve job starts printing immediately. The
FREE JOB key on the screen is touch sensitive and active only when another job is in
progress; otherwise it appears grayed out.
❒ Job settings: Max. 5 (current job plus 4 reserve jobs)
❒ The reserve job is available to be set after the copier starts to scan the current job.
When setting more than one reserve job, the next reserve job setting will be available
after the copier starts to scan for the previous reserve job.
When the current job is under Store mode, Image insert, or Book copy, the reserve job
setting will be available after the copier starts to print the current job.
❒ If certain conditions occur while a reserve job is being set, such as activation of Interrupt
mode, mishandled paper, or running out of paper, the current printing job will cease and
the FREE JOB indicator on the screen will be replaced by INTERRUPT, JAM or ADD
PAPER, as appropriate. Perform the required measure for the situation at hand.
❒ The order of the reserve jobs can be altered on the Job Status Screen.
❒ The reserve jobs can be deleted on the Job Status Screen.
❒ Incompatible Basic Copy Conditions: Interrupt copying, Scanning in Store mode, Proof
copy
❒ Incompatible Special Originals: Resolution (Very High)
❒ Incompatible Applications: Program Job, Overlay, Storing image in Overlay Memory
Procedure
1
Start Copying: Present Job
Press [ START ] to scan for the current job.
The FREE JOB key next to the current job key will become active to show that the
reserve job setting is now available.
Basic Screen: reserve job unavailable
Section 6 : Basic Operations
Basic Screen: reserve job available
6 6
Basic Basic
Operation Operation
Paper Size
Reserve
6 - 23