Table of Contents
Advertisement
Paper Size
The tray selection keys below PAPER SIZE are used to select a specific paper tray. When
a specific tray is selected, the APS key will be deselected and the AMS key will be
highlighted. The paper size may require a ratio adjustment. When using the RADF with
Initial settings, a ratio will be selected automatically.
Tray locations correspond to main body (trays 1, 2, 3), LCT (tray 4), and Multi-sheet
bypass tray. Paper types, such as Normal, Thick 1, Thick 2, Thin, Tab paper, User, Recycle,
Color, Special, Fine, Seal may be specified on some trays by the key operator, and also
can be detected by the machine.
NOTE:
Do not load paper type other than that specified, otherwise machine trouble may be caused.
Paper Size Specifications
❒ When a selected tray is empty, an out-of paper icon will flash on the tray key, along with
a message to load paper in the empty tray.
❒ In 1s2 or 2s2 copying, the tray specified as Thick 2 or Tab paper cannot be used.
❒ When the Bypass key is touched and highlighted, the PAPER TYPE/SIZE key appears
above the Bypass key. Touch the key to display the Special Paper Type/Size Setting
Screen, then specify the type and size of the special paper to be loaded on the Multi-
sheet bypass tray.
❒ Incompatible Basic Copying Conditions with AMS: APS, Change magnification
❒ Incompatible Special Originals with AMS: None
❒ Incompatible Applications with AMS: Dual page, Non-image area erase, Repeat, AUTO
layout, Overlay
Basic Screen
Procedure
1 Touch the desired tray key to highlight it.
2 APS will be deselected, and AMS will be highlighted on the Basic Screen.
When selecting the Bypass key , see p. 6-20 to p. 6-22.
NOTE:
See p. 6-14 for details in AMS function.
Section 6 : Basic Operations
Basic Screen
6
6
Basic
Basic
Operation
Operation
Lens Mode
Paper Size
6 - 19
Advertisement
Table of Contents
