Table of Contents
Advertisement
1
Section 1 : Introduction
Introduction
Features of the Konica 7075 (continued)
• Paper Capacity
Total 2,150 sheets, including two 500-sheet trays, a 1,000-sheet tray, and a 150-sheet
Multi Sheet Bypass tray.
Total 6,150 sheets, including 4,000 sheet optional large capacity tray.
• Platen Memory
Scan documents into memory from the platen glass and/or the document feeder and
insert the pages into another document copied from the document feeder. If an incompatible
function is selected in this mode, the latter function will not be selected, and a Caution
message will be displayed.
• Power Saver
Automatically turns off all but nominal power supply after a specified period of copier
inactivity, for optimal efficiency. Power is returned after a brief warm up period by pressing
[ POWER SAVER ON/OFF ] key on the Control panel.
• Program Job
Scan documents into memory while designating a different copy condition for each original,
then print all the images collectively.
• Proof Copy
To ensure correct output before running multiple copies, run a proof copy by touching
PROOF COPY on the Check Screen or pressing [ PROOF COPY ] key on the Control panel.
• Punching Mode for FS-108/108BM Finisher with PU-108 Punching Unit Installed:
Punch four holes in output copies.
• Punching / Z-Folding Mode for FS-108/108BM Finisher with PZ-108 Punching / Z-
Folding Unit Installed:
Punch holes in output copies and Z-fold copied sheets.
• Repeat Image
Select the horizontal image area across the page, and repeat it down the page as many
times as the repeat width setting (10 ~ 150mm) permits in manual or auto.
• Reserve
Scan in subsequent copy jobs while the 7075 is busy printing or copying.
• Resolution (High, Very High)
High resolution mode and Very High resolution mode provide optimal image quality for
photos and complicated graphics and text that require high to very high compression
amounts.
• Reverse Image
Reverse the image from black-on-white to white-on-black or vice versa.
• Rotation Exit (Rotation Sort/ Rotation Group)
When no Finisher is installed, Rotation Exit alternately switches the landscape and portrait
orientation of each sorted set as it outputs to the exit tray. Be sure to load both A4/B5 and
A4R/B5R in separate trays (including the Multi-sheet bypass tray) before selecting this
feature.
1 - 5
Advertisement
Table of Contents
