Lunch Hour Off Setting [4] - Konica Minolta 7075 Instruction Manual

Section 12 : Key Operator Mode
Weekly Timer [9] (continued)

Lunch Hour Off Setting [4]

The Weekly timer function turns the copier ON and OFF once a day. Use this Lunch hour
off function to shut down power for lunch break then turn on again while the copier is
turned on due to the Weekly timer function. The only one off time interval can be
programmed.
Weekly Timer Setting Menu Screen
Procedure
1 Press [ HELP ] to display the Help Screen, then touch Key Operator Mode .
Enter a 4-digit key operator password, then touch OK to display the Key Operator
Mode Screen. (See note 1.)
2 Touch [9] Weekly timer . Enter your 4-digit Weekly timer master key code, then touch
OK to display the Weekly Timer Setting Menu Screen. (See note 2.)
3 Touch [4] Lunch hour off setting to display the Lunch Hour Off Setting Screen.
4 Touch Function Valid to activate the Lunch hour off function. Set OFF-time and
Restart-time using the touch screen keypad, and then touch SET after each entry.
Touch Function Invalid to de-activate the Lunch hour off function. The time setting
area will appear grayed out and cannot be selected.
The Function Invalid setting is the factory default setting.
5 Touch OK to complete the setting and return to the Weekly Timer Setting Menu
Screen.
6 If other Weekly timer settings are required, select another desired menu item, from
[1]~[5].
7 Touch PREVIOUS SCREEN to restore the Key Operator Mode Screen. If other key
operator settings are required, select the desired menu item, from [1] to [18].
8 If no further changes are required, touch PREVIOUS SCREEN to restore the Basic
Screen to perform copying operations.
NOTES:
1 If an invalid Key operator password is entered, continue by entering the valid 4-digit password.
2 If an invalid Weekly timer master key code is entered, continue by entering the valid 4-digit
code.
12 - 34
Lunch Hour Off Setting Screen